Quantcast
Jump to content

J2534 Passthrough Programer

Junior
 Share

Recommended Posts

Junior Collaborator

Junior

Posted
Posted

I'm looking at expanding our ability to update software on more vehicles. The tool I currectly have only has support for most Asian makes. As it is J2534 compatable it may work with others but I don't want to risk bricking a customer's ECU due to not having the correct tool. Looking at buying a Drew Tech tool. Wondering who is doing this work, have you seen a return on your invetment in this type of tool. What kind of tool are you using. How often do you do a software update and what do you charge for it?

 

We have only run into a handfull of scenarios where a software update repaired the customer complaint. I'm a little concerend about spending a few grand on a fully equiped tool that may not generate new business. At the same time I feel the need to have the tool in order to avoid sending the repairs that require updates to the dealer.

 

You thoughts and comments?

 

thanks!

CARMandP Proficient

CARMandP

Posted
Posted

I am looking at investing in one of these within the next year as well. I know in our area there are very few places that do reprogramming other than the dealer. You may want to promote this to your "competition" around you if you decide to get one. I can't give you any good recommendations for tools yet as I haven't decided myself.

Junior Collaborator

Junior

Posted
  • Author
Posted

I saw the flash II, it looks far to limited. Focusing on only Domestic manufacturers and does not seem to support J2534-2 for other modules. So far the best I've found is the Drew Tech products. If there is something else more comprehensive or cost efective I'd like to know about it though.

  • 4 weeks later...
ATLAuto Rising Star

ATLAuto

Posted
Posted

I saw the flash II, it looks far to limited. Focusing on only Domestic manufacturers and does not seem to support J2534-2 for other modules. So far the best I've found is the Drew Tech products. If there is something else more comprehensive or cost efective I'd like to know about it though.

 

Wow, what a coincidence. I clicked on this forum to ask if anyone has used the Drewtech CarDAQ yet (http://www.drewtech.com/products/cardaqplus.html). I just spent an hour on the phone with their salesperson. Very technical and knowledgeable fellow. My understanding is that the CarDAQ will interface with every J2535 vehicle (ie almost every vehicle made since 2004) for $1500.

 

However, that just gets you connected. You still need software for it. The program that comes with CarDAQ provides links to all the OEM's allowing you to buy anything from a 1 hour to a 1 year pass to use the OEM software (most is web-based).

 

Sounded pretty good to me. However, I am skeptical with salespeople, and this sounded a bit too good to be true. Anyone used this tool yet?

  • Like 1
ncautoshop Proficient

ncautoshop

Posted
Posted

 

Wow, what a coincidence.  I clicked on this forum to ask if anyone has used the Drewtech CarDAQ yet (http://www.drewtech.com/products/cardaqplus.html).  I just spent an hour on the phone with their salesperson.  Very technical and knowledgeable fellow.  My understanding is that the CarDAQ will interface with every J2535 vehicle (ie almost every vehicle made since 2004) for $1500.

 

However, that just gets you connected.  You still need software for it.  The program that comes with CarDAQ provides links to all the OEM's allowing you to buy anything from a 1 hour to a 1 year pass to use the OEM software (most is web-based).

 

Sounded pretty good to me.  However, I am skeptical with salespeople, and this sounded a bit too good to be true.  Anyone used this tool yet?

I've been looking at this to, but wondering if it would be better to buy dealer tools.

 

Sent from my DROID RAZR using Tapatalk 2

ATLAuto Rising Star

ATLAuto

Posted
Posted

I've been looking at this to, but wondering if it would be better to buy dealer tools.

 

Sent from my DROID RAZR using Tapatalk 2

 

My understanding is that the "dealer tool" is nothing more than a fancy pass-through tool. It's the software on the laptop that matters. I'm going to give Drewtech another call this week. Please let me know if you have any specific questions you want me to run by them. Probably going to buy this tool.

Junior Collaborator

Junior

Posted
  • Author
Posted

Most manufacturers are moving towards passthrough tools as the factory scan tool. The drew tech tool supports most monufactueres that have this functionality. For some manufactueres like BMW repair data isn't even available unless you subscribe to thier system and use the guided fault finding tools.

ATLAuto Rising Star

ATLAuto

Posted
Posted

Junior, did you end up getting this tool? Very much looking forward to hearing someone's experience with it.

 

On another note, I've been hearing a lot about Autel lately. Supposedly, a bunch of ex Snap-On guys started the company and made this tool to give Snap-On a run for its money. Please don't quote me on that, since it's what I heard from their salesperson.

 

http://www.autel.us/

ATLAuto Rising Star

ATLAuto

Posted
Posted

Update on this one. Just got off the phone with DrewTech. Great guys. In summary, I would call the CarDAQ a top of the line REFLASHING TOOL with some added diagnostic capabilities. Great with Toyota's Techstream, great with Volvo's VIDA, and great on newer GM's (the sheet is misleading, you still need a Tech2 for older GM's). Other OEM's, you'll need another diagnostic tool like the Snap-On or dealership level.

 

Junior, I'm not sure if you've seen this chart, but it really clarifies what the CarDAQ does and does not do:

 

http://drewtech.com/technician/support/oemapps.html

 

I'm going to order one.

  • 1 month later...
ATSAutomotive Collaborator

ATSAutomotive

Posted
Posted

I recently bought a Snap On PassThru Pro 2 (the cardaq with snapon written on it) Works awesome for me. Keep in mind this is certainly not an all in one. This is for flashing mostly, but you can look at codes and some data on some vehicles. Its a very good pass thru device and couple with our snap on solus, we can do most of what we need. Buy the cardaq from drew technologies as I have to download driver updates from Snap on because they are slightly different. (snap on most likely just wanted control of something....not a big supporter of Snap on...)

  • Like 1
  • 1 month later...
Pjauto Enthusiast

Pjauto

Posted
Posted

That Drew Tech unit looks real nice. Do you know if it can program PATS and other security systems? Thus far I have had to have a locksmith come to my shop 3 times in 4 months to program keys due to either new lock cylinder or ECM or what have you. That costs me $100 bucks a pop. If this tool could help with just that it could pay for itself quickly.

ATLAuto Rising Star

ATLAuto

Posted
Posted

Do you know if it can program PATS and other security systems?

 

Yes and No.

 

Ford, GM, Volvo, and Toyota allow security programming through the standard J2534 protocol. The rest of the OEM's do not allow security through J2534; rather, they require their proprietary tool to do this programming (example: Honda needs the MVCI, Nissan needs the Consult3).

 

The DrewTech CarDAQ-Plus is pass-through interface from your laptop to the vehicle. You still need a subscription to the OEM database. Most offer one to three day subscriptions (Ford = $27, GM = $55, Volvo = $115, and Toyota = $55). The DrewTech software walks you through getting this subscription.

 

Is it worth it to do the key programming yourself? That really depends on your volume and how many times you call the key guys to come visit you. Most shops pass the subscription fee through to their customers. I don't have a problem with this, because they are still paying pennies on the dollar for what it would cost to bring their vehicle to the dealership.

Pjauto Enthusiast

Pjauto

Posted
Posted

I looked up the tool I saw my locksmith using online and I can buy one for only 90$ with free shipping and it claims to do every make and model key programming. I've seen him use that same tool to do a Honda and a Ford. So, I was assuming that if a cheasy tool like that can program all those different models that a nicer unit like the DrewTech could eat them for lunch.

Pjauto Enthusiast

Pjauto

Posted
Posted

Whoa. $1500 vs. $90 is a HUGE difference. Would you mind linking to the tool your guy used?

I can't find the exact one I saw the other day but this is similar. http://www.aliexpress.com/item/2012-Top-Rated-Wholesale-Price-Key-Programmer-Sbb-V33-Hot-Promotion/510959259.html

 

Mind you that this is just a key programmer that a locksmith would use or that we could for programming keys to cars or if we replaced a used PCM to program the security system. It is definitely limited compared to the DrewTech. I was just sort of hoping the DrewTech would also serve as this programmer as well.

Pjauto Enthusiast

Pjauto

Posted
Posted

Interesting. For $90, I think you need to buy one and report back to us. I'll come down to Savannah and help you test it out!

Sweet! Whats your credit card number so I can order this thing?? Just kidding. Yes, I will likely get one soon and let you know.

ATSAutomotive Collaborator

ATSAutomotive

Posted
Posted (edited)

http://www.drewtech.com/technician/products/cdplus.html

 

"Technicians can use CarDAQ-Plus for Security Key systems/programming on Ford, GM, and Toyota vehicles."

 

Most of the time I just run in to the issue of needing the PIN which you can only get if you are part of the Locksmith association crap. Maybe I need to do a little more research in to that.

Edited by ATSAutomotive
mmotley Proficient

mmotley

Posted
Posted (edited)

http://www.drewtech.com/technician/products/cdplus.html

 

"Technicians can use CarDAQ-Plus for Security Key systems/programming on Ford, GM, and Toyota vehicles."

 

Most of the time I just run in to the issue of needing the PIN which you can only get if you are part of the Locksmith association crap. Maybe I need to do a little more research in to that.

 

http://www.aloa.org/NASTFSDRMDocs/

 

$375 gets you a license for 2 years ($75 app fee to cover background check, $300 for 2 year membership).

Edited by mmotley
ATLAuto Rising Star

ATLAuto

Posted
Posted

Most of the time I just run in to the issue of needing the PIN which you can only get if you are part of the Locksmith association crap. Maybe I need to do a little more research in to that.

 

Good point. We are really getting to the point where we need an actual locksmith in this thread to answer some questions.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Available Subscriptions

    See all Subscription Plans

  • Have you checked out Joe's Latest Blog?

    • Joe Marconi
      The Toolbox is Last to Leave, First is the Heart
      By Joe Marconi in Joe's Blog
         0 comments
      It always amazes me when I hear about a technician who quits one repair shop to go work at another shop for less money. I know you have heard of this too, and you’ve probably asked yourself, “Can this be true? And Why?” The answer rests within the culture of the company. More specifically, the boss, manager, or a toxic work environment literally pushed the technician out the door.
      While money and benefits tend to attract people to a company, it won’t keep them there. When a technician begins to look over the fence for greener grass, that is usually a sign that something is wrong within the workplace. It also means that his or her heart is probably already gone. If the issue is not resolved, no amount of money will keep that technician for the long term. The heart is always the first to leave. The last thing that leaves is the technician’s toolbox.
      Shop owners: Focus more on employee retention than acquisition. This is not to say that you should not be constantly recruiting. You should. What it does means is that once you hire someone, your job isn’t over, that’s when it begins. Get to know your technicians. Build strong relationships. Have frequent one-on-ones. Engage in meaningful conversation. Find what truly motivates your technicians. You may be surprised that while money is a motivator, it’s usually not the prime motivator.
      One last thing; the cost of technician turnover can be financially devastating. It also affects shop morale. Do all you can to create a workplace where technicians feel they are respected, recognized, and know that their work contributes to the overall success of the company. This will lead to improved morale and team spirit. Remember, when you see a technician’s toolbox rolling out of the bay on its way to another shop, the heart was most likely gone long before that.

  • Similar Topics

    • Joe Marconi
      Business Slowing Down? Before You Spend More Money On Advertising, do this...
      By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • carmcapriotto
      Artificial Intelligence: We Have Some Concern! With Dan Vance [E016] - Speak Up!
      By carmcapriotto
      Our world is rushing head first into an A.I. future and we want to encourage our listeners to remain vigilant in these exciting times, as there is some legitimate cause for concern with the changes brought by A.I. Technology.
      Joining us as our guest is Dan Vance from Shop Dog Marketing.
      Craig has known Dan for a few years now and it was at ASTA in 2023 that he first heard Dan Speak Up on the topic of AI to a group of shop-owners on the promise and peril of AI…and he saw Dan deliver a presentation on the topic again at the MARS marketing conference with the Institute for Business Excellence in (beautiful) Ogde, UT earlier this year.
      In this episode Dan acknowledges many of Craig's concerns regarding AI, while they both align on the actual benefits. 
      Craig states regularly that the last skill machines should ever be able to take from us is our ability to communicate interpersonally and … but in some areas - A.I. is far more capable of outperforming certain tasks.  While that is happening - there remains a disconnect between AI’s ability to generate data and present the data in a way that can produce more effective interactions with real people. 
      Our listeners who may share in Craig’s concerns will no doubt appreciate Dan’s calm and reassuring thoughts on the topic.  
      Watch the YouTube Video
      Topics include:  
      Early AI and Machine learning The concept of Human Capital. Authenticity as a new focus Communication tendency becoming less synchronous Efficiency vs. Authenticity and what we lose AI Strengths and practical uses Social Proof - and a word on Reviews and AI Google quality rater guidelines - EAT - Experience Authority and Trust
      Join Our Virtual Toastmasters: https://remarkableresults.biz/toastmasters
      Thank You To Our Partners:
      The Institute at WeAreTheInstitute.com.  "Stop stressing over your business, you deserve a good night's sleep. The Institute’s coaching helps you achieve success and financial peace.
      AutoFlow at AutoFlow.com. Your partner in technology, Autoflow consolidates your client interactions - before, during and after the visit to a single thread. Learn more at Autoflow.com
      AutoLeap at AutoLeap.com. Are you tired of juggling multiple tools to manage your auto repair shop? Say hello to the streamlined efficiency of AutoLeap, the #1 all-in-one Auto Repair Shop Management Software!
      Shop Dog Marketing at Shop Dog Marketing.com. "Want to see your auto repair shop thrive? Let Shop Dog Marketing be your guide. Our customer-first approach, combined with AI-driven creative content, ensures top rankings.
      In-Bound at CallInBound.com. Cover your communication needs and revolutionize your auto repair business with AI-driven call analytics from InBound.
      Contact Information
      Email Craig O'Neill: [email protected] Join Our Virtual Toastmasters Club: https://remarkableresults.biz/toastmasters
      The Aftermarket Radio Network: https://aftermarketradionetwork.com/
      Remarkable Results Radio Podcast with Carm Capriotto: Advancing the Aftermarket by Facilitating Wisdom Through Story Telling and Open Discussion. https://remarkableresults.biz/
      Diagnosing the Aftermarket A to Z with Matt Fanslow: From Diagnostics to Metallica and Mental Health, Matt Fanslow is Lifting the Hood on Life. https://mattfanslow.captivate.fm/
      Business by the Numbers with Hunt Demarest: Understand the Numbers of Your Business with CPA Hunt Demarest. https://huntdemarest.captivate.fm/
      The Auto Repair Marketing Podcast with Kim and Brian Walker: Marketing Experts Brian & Kim Walker Work with Shop Owners to Take it to the Next Level. https://autorepairmarketing.captivate.fm/
      The Weekly Blitz with Chris Cotton: Weekly Inspiration with Business Coach Chris Cotton from AutoFix - Auto Shop Coaching. https://chriscotton.captivate.fm/
      Click to go to the Podcast on Remarkable Results Radio
    • Joe Marconi
      Is Word of Mouth Still You Most Effective Advertising Channel?
      By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • Changing The Industry
      Why Trusting Our Services Makes All the Difference #podcast #autorepairbusiness #automotivebusiness
      By Changing The Industry
      Why Trusting Our Services Makes All the Difference #podcast #autorepairbusiness #automotivebusiness
    • Joe Marconi
      Are You Sure You Want to Charge Your Customers A Fee for Using Their Credit Card?
      By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.



  • Joe Marconi

    Isn’t It Time We Rethink What a Master Level Technician Is?

    By Joe Marconi, in Automotive Industry,

    1 comment 119 views
    Joe Marconi

    Money Isn’t The Motivator We Think It Is

    By Joe Marconi, in Automotive Management,

    0 comments 83 views
    Joe Marconi

    Five Proven Tips to Improve Your Bottom Line

    By Joe Marconi, in Selling Automotive Repair,

    0 comments 105 views

  • Our Sponsors



Main Sections

More Sections

Discussion Forums

×
×
  • Create New...