Quantcast
Jump to content


What do you think? Need advice from Guru's

GenX Auto Works

By GenX Auto Works
in New Member's Area

 Share

Recommended Posts

GenX Auto Works Apprentice

GenX Auto Works

Posted
Posted

Ok folks I need some help. I have been reading a lot here lately but just registered today. You folks are a wealth of information and I would be extremely grateful for any help. Warning, this is a bit long-winded!

Let me give you a quick background on me, then what I am trying to do, and where I am at with the process.

I am 37 years old and have had a dream of opening a hot rod shop for about 30 years. I have wrenched on cars for most of my life off and on, building several cars over the years including a 70 mach1, 67 cougar, 85 camaro, and others. Working on cars has always been just a passion, nothing I really made money with, nor do I consider myself a true mechanic. I did ten years in the Army as infantrymen and two tours to Iraq. Since being home and out of the Army I have worked as an Army contractor where I teach soldiers how to use the computer systems they will use in combat. My education includes an understanding of accounting, business law and ton of information technology. Leadership wise I was a team leader, squad leader, platoon sergeant, and battle NCO in the Army so I think I have the leadership stuff covered. As for financing I have gathered 10 investors that are very interested in the idea. My wife and I also have loans available to us as disabled combat veterans. Long story short, it is time to reach for my dreams and make my shop happen.

As of now I am in the planning, and data collecting phase. I have a rough draft of my business plan done and I have an appointment with the local small business administration next week.

Let me tell you about the proposed business. The business will consist of three buildings in a U shape configuration on around 6 acres of land. The middle building will be for admin and inventory, the two side buildings will consist of four bays each. One side for general repairs, the other building will be a performance and detail shop. These services (performance and detail) are not currently available in the town I live in (population 40,000 and growing rapidly, not including surrounding areas). I feel the market would be huge as there are many gear-heads in the area that have to go two towns away for these services. In the front lot I will offer 3-5 cars for sale that I will market to parents who want a safe dependable first car for their teen while not spending a lot of money. I will purchase fleet cars at auction, conduct the maintenance and repairs and then resale. I plan to keep around 2 “special” cars for sale on the lots as well. These cars will be sort of a middle class hot rod. The only place to buy any hot rod is 40 miles away and for over $20k. They only carry things like 69 fastbacks and 67 camaros, you get the idea. These cars are not in very good shape and VERY expensive for what you get. I will find and repair cool cars that can be bought and repaired cheap, and then sold as a cool hot rod to those who cannot spend 20K plus on a car that sits in their garage 9 months a year but still want something fun to drive that doesn’t leave a puddle of fluids where they park. Where I am, you can find 70 novas, impalas, monte carlos, and all kinds of neat cars to fix up and sale without breaking the bank. I will need to lease a flat bed for hauling from auction, so I suppose if things get slow I can use the truck for towing as well.

Once up and running I would like to experiment with electric hot rods and gas to electric conversions.

So now for my questions….

1. Assuming business is decent, how many employees would it take to run this monster?

2. What positions should I hire?

3. Given my experience what should my role be?

4. What are a must for tools? Hand tools, power tools, lifts, and so on. How many and what? Best way to purchase in bulk?

5. I have no desire to start small, what are the pitfalls of starting this large.

6. Anyone else sale used cars AND fix them? Any advice?

These are just a few questions I have, but I don’t want to bombard you too much 

Thanks so much for your time and knowledge!

Guy,

GenX auto works



GenX Auto Works Apprentice

GenX Auto Works

Posted
  • Author
Posted

Thanks so much for the answers! On the tool front I suppose like you said, I will get the big stuff and if a need arises I will purchase from there. On the partners, you are right. One of the big things I would like to get away from are bosses. I may narrow it to one or two, just so financing is a little easier with out having to answer to too many people. The wife and I both qualify for loans so we should be able to do this without them. On the positions to hire and my role I was asking from the standpoint of having 8 bays and an admin building. I would like to start with one detailer, two tech in the performance shop, and to in the repair shop. Maybe do time with a desk person fielding call and what not. Not sure what to do about bathrooms and property maintenance type stuff. So much to think about I don't know how you guys did it!

gravysuckinpig Explorer

gravysuckinpig

Posted
Posted

umm - we started small - this cant be stressed enough - with what i know now - i would start with 4 or 5 bays- 3 for general repairs and 1 or 2 for the detailing- let your general techs handle any performance work in the beginning untill you really see a need for more expertise in that area - the reason for this is simple - most gearheads are gearheads because they like to do their own work- thats where they get their enjoyment - not to mention, by the time they buy all those shiny chrome parts they have no $$ left to pay you to put them on. not trying to crush your dream but just speaking from experience - as for the sales part - find yourself someone with a sales license and see what you need to do to be able to sell cars- xrac was right there are alot of stipulations to running a sales lot- some of them are dumb - in ohio you need a 750sq ft lot an office and a file cabinet- a freind of mine who is a dealer told me he got fined for having some small 2 inch weeds growing through the cracks in his asphalt- this is a very competitive business - which is a good reason to start as small as possible- i would buy all the land i needed for the whole operation and do 1 building at a time as needed.

GenX Auto Works Apprentice

GenX Auto Works

Posted
  • Author
Posted

umm - we started small - this cant be stressed enough - with what i know now - i would start with 4 or 5 bays- 3 for general repairs and 1 or 2 for the detailing- let your general techs handle any performance work in the beginning untill you really see a need for more expertise in that area - the reason for this is simple - most gearheads are gearheads because they like to do their own work- thats where they get their enjoyment - not to mention, by the time they buy all those shiny chrome parts they have no $$ left to pay you to put them on. not trying to crush your dream but just speaking from experience - as for the sales part - find yourself someone with a sales license and see what you need to do to be able to sell cars- xrac was right there are alot of stipulations to running a sales lot- some of them are dumb - in ohio you need a 750sq ft lot an office and a file cabinet- a freind of mine who is a dealer told me he got fined for having some small 2 inch weeds growing through the cracks in his asphalt- this is a very competitive business - which is a good reason to start as small as possible- i would buy all the land i needed for the whole operation and do 1 building at a time as needed.

 

 

Thank you very much for your answer. Very good advice. I am in the process of working out the kinks for the sales lot. I will likely get my dealers licence and do that piece myself. If I have to start smaller, I will. I'm hoping to find a way to make the whole thing work, but you know what they say... "hope in one hand and #^$^& in the other and see which fills up first" or something like that :) You guys are the experts and that is why I am so grateful to have found this site. You guys have been a world of help already. I'm waiting for the day when I can share my experience with others.

Oh by the way I'm in WA state. I thought it showed on my profile, sorry about that.

GenX Auto Works Apprentice

GenX Auto Works

Posted
  • Author
Posted

I will just say this about partners in my experience. One partner is one too many. As far as market size for a franchise typically 6-8 bays) Car-x likes to have a market of at least 80,000.

 

 

Yeah, I think you are right about the partner thing. If I can do it on my own I will. Our market is at just over 40,000 but the surrounding area is much larger. The town I live in is growing rapidly, and the services I will provide are currently hard to find. I may reduce to 4-6 bays then and leave room for expansion. Thanks again you guys!

 

A few more questions :) ...

 

1. If there was one employee/ duty position you could not live without, what would it be?

 

2. What do you do about building and grounds maintenance?

 

3. Besides lifts, compressors and all the normal stuff, are there any "must have" tools that someone might not think of when starting out?

DewayneP Contributor

DewayneP

Posted
Posted

I can't help you too much but I'll try. I would think you would want to start out small first, build clientel and then go big. Since you are starting a business where this is none you may find out why there's no competition, because no-one needs or wants those services. I think you should try to find a place you can lease on a temporary basis, buils up some repair/maintenance clientel. Those clientel will be the ones that will get you through the tough times. You also say you are totally new to this, never been in the "business" before. You need to find a "partner" (but he/she doesn't have to truly be a partner in the business) that can help you with the mundane tasks at hand like what equipment to purchase, how to set up the bays, what inventory to stock and what to purchase as needed. You may want to talk to a local parts store or parts wharehouse rep and see what they have to offer as far as what inventory moves in your area and what doesn't. I'm thinking a rep from Mighty, NAPA, CarQuest, ServiceChamp, etc... You can talk with them without comitting to purchase anything. They can get you going on the repair side of things.

As far as equipment goes: A good Rim Clamp tire machine is a must these days as well as a spin balancer that will handle the same size tires/rims that the tire machine will handle. No sense buying a tire machine that'll do 48" tall tires and a spin balancer that won't balance them. I'm not saying go out and buy the biggest and best, buy smart. Think of who your clientel will be and go from there. A workbench and great vise (notice I didn't say good vise, mechanics are hard on vises) is a necessity. A shop press: H frame 20 tons at least. A strut spring compressor (like a brannick or similar, OTC makes a good one).

One other piece of equipment you might not think about is a good computer infrastructure. Make sure if you are building that you have cat 5e cable run everywhere, even out in the bays. Also a good wireless network is a good idea. A lot of the newest scan tools offer a technician repair database that is accessed via the internet via a WIFI connection. No wifi, no fast fixes, longer repair times. A good PC that has no moving parts would be ideal for a POS computer. No moving parts means no hard drive to fail.

The biggest thing I can think of is this: You don't have to buy the biggest and best of anything. Spend your money wisely. There are $15,000 tire machines that can mount a tire without anyone touching anything and there are $4000 tire machines that will do almost the same job but they are manual. I have been at this only 3 years myself. I wouldn't change much if I had to do it over again. I'm not big, just a one man shop, but I've learned the hard way to not stock too many parts and not to buy equipment at an auction without trying it out first no matter how good of a buy you think it is.

GenX Auto Works Apprentice

GenX Auto Works

Posted
  • Author
Posted

Joe,

thanks so much for the reply and the great advice. I go to the local business administration on Wednesday for them to review my phase 1 plan. Once I know the tweaks I need to make I will take it to the proper people for help (business lawyer, accountant, consultant, so on) for phase 2. I am encouraged that you are having luck with used car sales and I wish you great success. The laws in my area are tough for selling cars, but if it was easy everyone would do it. The market I'm trying to fill, currently is not being addressed. I would like to use this as a way to give myself just one more avenue to success while filling a need in the community. I will do my best to get the right staff in place so I don't have to be everything to everyone and I can focus on the business side. Thanks again, I will keep everyone updated as I proceed.

GenX Auto Works Apprentice

GenX Auto Works

Posted
  • Author
Posted

OK, so a little update.

I went to pitch my plan yesterday at the local small business administration. The guy threw my plan to the side without looking at it. He then told me a 30 minute story about how he worked the oil fields in the 50's, and how he is not "familiar" with the internet. Bottom line is, it was a complete waste of time. I understand most of the "counselors" there are likely volunteers, but holy cow they could not have been any less helpful. I went in with all my questions written down and a professional looking business plan that I worked on for ages and I received no feed back at all. It was a bit discouraging, being I had made the appointment weeks ago, and had been looking forward to moving one step closer. Oh well, I will get back to work at it and see what I can do from here.

gravysuckinpig Explorer

gravysuckinpig

Posted
Posted

heres what you do.... when you get the business started, be sure to stop back in there and hand out free oil change coupons..... when that guy shows up with his coupon....write him up and after he signs the work order throw it aside and tell him a story about how you spent all this time making a business plan and took it to the sba.........

DewayneP Contributor

DewayneP

Posted
Posted

Hmm, yeah the SBA isn't great, but my experience with SCORE wasn't much better. They did look at my business plan and made some comments about it but basically told me good luck. Not in a bad way, just good luck. They did give me 2 bits of good advise: Never give away your services, barter is OK but don't do anything for free!!! (diagnostics comes to mind). Also, be sure to pay yourself first. Never buy something for the business without taking your pay out first. You can't survive if you don't get paid.

GeeZ Enthusiast

GeeZ

Posted
Posted

Pretty ambitious plan for a 1st business. Especially for no management experience. The SBA does not lend money, they only guarantee the loan

thru a bank. So you should have started with a bank who does SBA loan. At time, they are difficult to get as the banks are not even lending to

on going businesses. Be careful with borrowing friends/family because it it a good way to loose friends and make for angry relatives.

 

I started a shop (hi-perf). I spent $350,000 the first year with 2 techs. I am not a mechanic, but have 40 years managing several businesses (concurrently.) My wife and I do not draw a salary. 2 years later, we are barely breaking even. Shop has 2-4 post bays, 2-2 post, chassis dyno, air compressor, 2 band saws, TIG welder, drill, sanders, and misc. shop hand tools. We now have 4 techs. My investment doesn't compare with what you are planning. I have learned a lot about this business in the process.

 

You are starting with a lot of overhead and you need to draw a salary. Go slow is best advice I can give you.

GenX Auto Works Apprentice

GenX Auto Works

Posted
  • Author
Posted

Thanks everyone for the replies. I will keep at it and use all my resources. I will let everyone know how I will proceed. After I thought about it, I just put it in the "one to grow on" category and will use it to help others when I have found my way. Thanks again

Southeast Tire Co. Contributor

Southeast Tire Co.

Posted
Posted

Pretty ambitious plan for a 1st business. Especially for no management experience. The SBA does not lend money, they only guarantee the loan

thru a bank. So you should have started with a bank who does SBA loan. At time, they are difficult to get as the banks are not even lending to

on going businesses. Be careful with borrowing friends/family because it it a good way to loose friends and make for angry relatives.

 

I started a shop (hi-perf). I spent $350,000 the first year with 2 techs. I am not a mechanic, but have 40 years managing several businesses (concurrently.) My wife and I do not draw a salary. 2 years later, we are barely breaking even. Shop has 2-4 post bays, 2-2 post, chassis dyno, air compressor, 2 band saws, TIG welder, drill, sanders, and misc. shop hand tools. We now have 4 techs. My investment doesn't compare with what you are planning. I have learned a lot about this business in the process.

 

You are starting with a lot of overhead and you need to draw a salary. Go slow is best advice I can give you.

 

 

I would have to concur with this assessment. The current commercial lending situation is tight at best. I think it is awesome to have a grand dream but I think you should consider smaller steps in achieving it. You are talking about a multi-million dollar investment before a profit is realized. Dream with your heart but reason with your head.

CARMandP Proficient

CARMandP

Posted
Posted

I can vouch for this information. All I was trying to loan was 20k in the last six months with near perfect credit but it was pulling teeth to get it and I still wasn't able to get the full amount.

CARMandP Proficient

CARMandP

Posted
Posted

Which you can't purchase the building because they aren't loaning the money to buy with in the first place. All because a few people ruined the system for the rest of us.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Available Subscriptions

    See all Subscription Plans

  • Have you checked out Joe's Latest Blog?

    • Joe Marconi
      The Toolbox is Last to Leave, First is the Heart
      By Joe Marconi in Joe's Blog
         0 comments
      It always amazes me when I hear about a technician who quits one repair shop to go work at another shop for less money. I know you have heard of this too, and you’ve probably asked yourself, “Can this be true? And Why?” The answer rests within the culture of the company. More specifically, the boss, manager, or a toxic work environment literally pushed the technician out the door.
      While money and benefits tend to attract people to a company, it won’t keep them there. When a technician begins to look over the fence for greener grass, that is usually a sign that something is wrong within the workplace. It also means that his or her heart is probably already gone. If the issue is not resolved, no amount of money will keep that technician for the long term. The heart is always the first to leave. The last thing that leaves is the technician’s toolbox.
      Shop owners: Focus more on employee retention than acquisition. This is not to say that you should not be constantly recruiting. You should. What it does means is that once you hire someone, your job isn’t over, that’s when it begins. Get to know your technicians. Build strong relationships. Have frequent one-on-ones. Engage in meaningful conversation. Find what truly motivates your technicians. You may be surprised that while money is a motivator, it’s usually not the prime motivator.
      One last thing; the cost of technician turnover can be financially devastating. It also affects shop morale. Do all you can to create a workplace where technicians feel they are respected, recognized, and know that their work contributes to the overall success of the company. This will lead to improved morale and team spirit. Remember, when you see a technician’s toolbox rolling out of the bay on its way to another shop, the heart was most likely gone long before that.

  • Similar Topics

    • Changing The Industry
      Episode 190 - Hacking Incidents and Protecting Client Information With Cavan Robinson of Vehlo
      By Changing The Industry
      Episode 190 - Hacking Incidents and Protecting Client Information With Cavan Robinson of Vehlo
    • carmcapriotto
      Artificial Intelligence: We Have Some Concern! With Dan Vance [E016] - Speak Up!
      By carmcapriotto
      Our world is rushing head first into an A.I. future and we want to encourage our listeners to remain vigilant in these exciting times, as there is some legitimate cause for concern with the changes brought by A.I. Technology.
      Joining us as our guest is Dan Vance from Shop Dog Marketing.
      Craig has known Dan for a few years now and it was at ASTA in 2023 that he first heard Dan Speak Up on the topic of AI to a group of shop-owners on the promise and peril of AI…and he saw Dan deliver a presentation on the topic again at the MARS marketing conference with the Institute for Business Excellence in (beautiful) Ogde, UT earlier this year.
      In this episode Dan acknowledges many of Craig's concerns regarding AI, while they both align on the actual benefits. 
      Craig states regularly that the last skill machines should ever be able to take from us is our ability to communicate interpersonally and … but in some areas - A.I. is far more capable of outperforming certain tasks.  While that is happening - there remains a disconnect between AI’s ability to generate data and present the data in a way that can produce more effective interactions with real people. 
      Our listeners who may share in Craig’s concerns will no doubt appreciate Dan’s calm and reassuring thoughts on the topic.  
      Watch the YouTube Video
      Topics include:  
      Early AI and Machine learning The concept of Human Capital. Authenticity as a new focus Communication tendency becoming less synchronous Efficiency vs. Authenticity and what we lose AI Strengths and practical uses Social Proof - and a word on Reviews and AI Google quality rater guidelines - EAT - Experience Authority and Trust
      Join Our Virtual Toastmasters: https://remarkableresults.biz/toastmasters
      Thank You To Our Partners:
      The Institute at WeAreTheInstitute.com.  "Stop stressing over your business, you deserve a good night's sleep. The Institute’s coaching helps you achieve success and financial peace.
      AutoFlow at AutoFlow.com. Your partner in technology, Autoflow consolidates your client interactions - before, during and after the visit to a single thread. Learn more at Autoflow.com
      AutoLeap at AutoLeap.com. Are you tired of juggling multiple tools to manage your auto repair shop? Say hello to the streamlined efficiency of AutoLeap, the #1 all-in-one Auto Repair Shop Management Software!
      Shop Dog Marketing at Shop Dog Marketing.com. "Want to see your auto repair shop thrive? Let Shop Dog Marketing be your guide. Our customer-first approach, combined with AI-driven creative content, ensures top rankings.
      In-Bound at CallInBound.com. Cover your communication needs and revolutionize your auto repair business with AI-driven call analytics from InBound.
      Contact Information
      Email Craig O'Neill: [email protected] Join Our Virtual Toastmasters Club: https://remarkableresults.biz/toastmasters
      The Aftermarket Radio Network: https://aftermarketradionetwork.com/
      Remarkable Results Radio Podcast with Carm Capriotto: Advancing the Aftermarket by Facilitating Wisdom Through Story Telling and Open Discussion. https://remarkableresults.biz/
      Diagnosing the Aftermarket A to Z with Matt Fanslow: From Diagnostics to Metallica and Mental Health, Matt Fanslow is Lifting the Hood on Life. https://mattfanslow.captivate.fm/
      Business by the Numbers with Hunt Demarest: Understand the Numbers of Your Business with CPA Hunt Demarest. https://huntdemarest.captivate.fm/
      The Auto Repair Marketing Podcast with Kim and Brian Walker: Marketing Experts Brian & Kim Walker Work with Shop Owners to Take it to the Next Level. https://autorepairmarketing.captivate.fm/
      The Weekly Blitz with Chris Cotton: Weekly Inspiration with Business Coach Chris Cotton from AutoFix - Auto Shop Coaching. https://chriscotton.captivate.fm/
      Click to go to the Podcast on Remarkable Results Radio
    • Joe Marconi
      Do you have a Shop Foreman?
      By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • carmcapriotto
      Never, Ever Let Your Domain Name Expire [E123] - The Auto Repair Marketing Podcast
      By carmcapriotto
      Today’s episode tackles a critical issue that could cost your business thousands—your domain name. What happens if it expires? Spoiler alert: It’s not good. An expired domain can bring your website crashing down, devastate your SEO rankings, and even force you to pay big money to get it back. But don't worry, we’re here to guide you through it!
      We’ll dive into the risks of letting your domain lapse and share practical steps to make sure this never happens to you. This episode is packed with essential advice that could save you a fortune and keep your online presence safe.
      Grab your headphones, hit play, and let’s dive in!
      Thank you to RepairPal for sponsoring The Auto Repair Marketing Podcast. Learn more about RepairPal at https://repairpal.com/shops
      Lagniappe (Books, Links, Other Podcasts, etc)
      Aftermarket Radio Network: https://aftermarketradionetwork.com/ 
      How To Get In Touch
      Group - Auto Repair Marketing Mastermind
      Website - shopmarketingpros.com 
      Facebook - facebook.com/shopmarketingpros 
      Get the Book - shopmarketingpros.com/book
      Instagram - @shopmarketingpros 
      Questions/Ideas - [email protected] 
      Click to go to the Podcast on Remarkable Results Radio
    • carmcapriotto
      “I’m Just One of the Guys!” Being Seen Beyond Gender and Ethnicity [FTR 108]
      By carmcapriotto
      Thanks to our Partners, Shop Boss, and 360 Payments
      Emily Chung shares her experiences as a female minority shop owner in the automotive industry. She reflects on societal tendencies to highlight differences rather than commonalities. She encourages her peers to engage with her on business-related topics rather than focusing on her gender and ethnicity. Emily Chung, AutoNiche in Markham, ON. Emily’s previous episodes HERE Show Notes:
      Emily's Perspective as a Female Shop Owner (00:00:26) Challenges and Comments Faced (00:00:56) Desire for Business-Focused Conversations (00:01:41) Importance of Leadership and Skills (00:02:29) Understanding Intentions Behind Comments (00:03:52) Common Ground with Male Counterparts (00:04:57) Personal Mindset on Success (00:06:04) Role Model Considerations (00:06:54)
      Thanks to our Partners, Shop Boss and 360 Payments Shop Boss – Shop Management Software built by shop owners for shop owners. It works the way you need it to, right out of the box. Find on the web at https://shopboss.net Connect with the Podcast: -Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ -Join Our Virtual Toastmasters Club: https://remarkableresults.biz/toastmasters -Join Our Private Facebook Community: https://www.facebook.com/groups/1734687266778976 -Subscribe on YouTube: https://www.youtube.com/carmcapriotto -Follow on LinkedIn: https://www.linkedin.com/in/carmcapriotto/ -Follow on Instagram: https://www.instagram.com/remarkableresultsradiopodcast/ -Follow on Twitter: https://twitter.com/RResultsBiz -Visit the Website: https://remarkableresults.biz/ -Join our Insider List: https://remarkableresults.biz/insider -All books mentioned on our podcasts: https://remarkableresults.biz/books -Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom -Buy Me a Coffee: https://www.buymeacoffee.com/carm -The Aftermarket Radio Network: https://aftermarketradionetwork.com -Special episode collections: https://remarkableresults.biz/collections The Aftermarket Radio Network Remarkable Results Radio Podcast with Carm Capriotto: Advancing the Aftermarket by Facilitating Wisdom Through Story Telling and Open Discussion Diagnosing the Aftermarket A to Z with Matt Fanslow: From Diagnostics to Metallica and Mental Health, Matt Fanslow is Lifting the Hood on Life. The Auto Repair Marketing Podcast with Kim and Brian Walker: Marketing Experts Brian & Kim Walker Work with Shop Owners to Take it to the Next Level. The Weekly Blitz with Chris Cotton: Weekly Inspiration with Business Coach Chris Cotton from AutoFix - Auto Shop Coaching. Business by the Numbers with Hunt Demarest: Understand the Numbers of Your Business with CPA Hunt Demarest. Speak Up! Effective Communication with Craig O'Neill: Develop Interpersonal and Professional Communication Skills when Speaking to Audiences of Any Size.            
      Click to go to the Podcast on Remarkable Results Radio


  • Joe Marconi

    Isn’t It Time We Rethink What a Master Level Technician Is?

    By Joe Marconi, in Automotive Industry,

    1 comment 124 views
    Joe Marconi

    Money Isn’t The Motivator We Think It Is

    By Joe Marconi, in Automotive Management,

    0 comments 88 views
    Joe Marconi

    Five Proven Tips to Improve Your Bottom Line

    By Joe Marconi, in Selling Automotive Repair,

    0 comments 108 views

  • Our Sponsors



Main Sections

More Sections

Discussion Forums

×
×
  • Create New...