Quantcast
Jump to content


ADRIAN


Gonzo

Recommended Posts

This is a rather long.... long story. I normally don't make them this long because it gets boring (to me) to read them. But there is a reason this one is so long. Grab a coffee, take a little time read thru this one... and lets see if you have run across your own Rocky Balboa.

 

 

ADRIAN

 

 

Taking a line from the Rocky movies. “Adrian, Adrian!” If you can picture Rocky Balboa shouting out the name of his girlfriend you have a good idea what I experienced one day at the shop.

 

It all started with a phone call several weeks ago. A referred customer wanted some information about some repairs he wanted done to his late 90’s F150.

 

Mandy (my daughter and office manager) was in the office and as always handled all of this customers questions with the highest level of expertise. Several weeks later the truck showed up at the shop. The keys were in the overnight slot along with a hand scribbled note. The name and contact number with a brief description of the problems were all there. Although, most of it was misspelled but the main information was legible.

 

There was quite a bit on the list. It stretched from the front of the truck to the rear. First thing to do was get it up on the lift. Number one on the list was the front end. All four ball joints needed changed and the idler arm was trashed. (Sounds about right for a truck with 150k miles on it and looked like it had a pretty rough life.)

 

Now, to the other end of the truck. The rearend was the next issue. You couldn’t help but notice the leaking fluid out of the front of the assembly. I gave the driveshaft a jiggle… up and down and round and round….this rearend is shot. There so much play in the gears you could probably stick another rearend between the gaps of the gears. I grabbed the tire and gave it a turn. The growl from the center of the reared was so loud…. I don’t know how anyone could have driven it to the shop. This thing is totally shot.

 

Next item on the list was diagnose the cruise control. Anybody that has one of these should… if you haven’t ---YOU better…. Get the recall on the cruise control switch that is mounted on the master cylinder. Your dealer can tell you if your vehicle needs to have the recall done or not.

 

Obviously this owner never pays attention to those notices that the manufacture sends out. The only thing wrong with the cruise was the switch. The other and finally the last thing was the right side wiper didn’t work… at least that was what was written down on the invoice which was simply copied from the owners own notes. Oh, it worked but do ya think maybe, just maybe…. It might work better if you put the wiper blade on correctly. I’m not sure but I think it’s not supposed to be cork screwed twisted and pointing towards the sky. Another no brainer repair… OK, one more thing to write down on the invoice; replace wiper blades... Finally, all done.

 

Now that the “diagnostic” part of the repair is completed I’ll write up the damages and have Mandy call the customer while I get to the next job in the shop. I’ll wait till she gets off the phone, and then order what parts are needed. You know so far this is just like any other repair. I’ll admit a rather large list of repairs, but nothing out of the ordinary. What could go wrong now…?

 

But as usual there is always the “question and answer” part of the diagnostics. Mandy came out to the shop and asked the usual questions that a customer will usually ask; “Why does it cost so much, why can’t you just stop it from leaking instead replacing the entire rearend, why are the parts so expensive, can’t you do it cheaper…” you know the rest….

 

I explained everything to Mandy and she repeated it back to the customer. Just another day at the shop, just another repair, there was nothing out of the ordinary.

 

Now I never expected the owner to go for the rearend or for that matter the front end, mainly because of the cost. I don’t like to make snap judgments on cars or customers, but it seemed very highly likely that this guy didn’t have the cash flow to maintain his truck in decent shape. Otherwise, things would have been fixed long before they got into the shape they are in now.

 

I expected that, so it wasn’t any surprise that the only repairs I was going to make were the two cheaper repairs. (Cruise and wipers)

 

The work was completed and the truck was set aside to wait for the customer to pick it up the next day. Still, this is nothing new… just another repair.

 

The next day the customer came and picked up the car, well, I should point out that this guy wanted to strut his manly ego at the front counter. Me, I was doing what I normally do every day… fix the cars in the shop. Busy as could be in the back of the shop, Mandy came out to ask me a few questions.

 

A lot of times she may have a question on a part or description of the labor charges. While I was elbow deep in a job at hand she took down the information and headed back to the front office.

 

This guy wasn’t buying her answers. He wanted to “talk” with the mechanic that worked on the job. Mandy told him that I was busy and that if you can wait a few minutes I’ll see if I can pull him away from the job he’s on. By this time he had already stormed out the front door.

 

She didn’t even have a chance to finish her sentence….. The one that ended with…. “As soon as he gets a break he’ll make it to the front office to talk to you.” The next thing I know, that same truck is back in front of the service bays blocking as many doors as he could.

 

 

Then this Italian stallion of the motor world jumps out of his truck stands by the front fender with his arms stretched out and starts yelling at the top of his lungs and gives his best “Adrian” Rocky Balboa impression. “So, what is it? Ya don’t want to talk to me?!?!? I ain’t paying for the work unless I talk somebody that knows what they are doing!!!”

 

The first thing that crosses my mind is… “WHO’S THIS JACKASS!” Then I recognize the truck…got it…it’s the owner of the vehicle.

 

Upset about something but of course, I don’t know what.

 

“If you’re the fella waiting for me that was in the front office, I’m cleaning up now and I’ll be there in a minute…as you can tell I’m a little busy at the moment,” I said, a little louder than normal.

 

Not that I’m pissed, I’m more confused than anything else. “Rocky” leaves his truck where it is and walks to the front office door. I take off my welding gear, turn off the welder and clean up enough to go to the front office. (I was busy welding a door back together for another customer) As soon as I made it to the office the "Rocky" went right back into his ranting.

 

“I’m putting a notice up in my office and tell everybody I know how much of an asshole this place is,” he shouted back at me.

 

“So what’s your problem buddy,” I said, already getting steamed by this butt head’s constant badgering.

 

“I want to talk to the guy who worked on the car, not the gal in the front office. She is not a mechanic so obviously she doesn’t know what she is talking about. I’m a damn good mechanic myself and I don’t want to talk to some girl,” he blurts out.

 

“Oh really,” I said, “What shop do you work at?” Curious as to why a “damn” good mechanic brought his car to another repair shop.

 

“I’m an A/P mechanic…. That’s all you need to know,” he stammers out.

 

Nothing against aircraft mechanics… their great at what they do. But, let’s face it… a jet engine isn’t a car.

 

Well, this Balboa stand in was as much a jerk as I have ever seen. I explained why there is a pretty gal in the front office and what her job duties were. Also, how she has answered all of his questions over the phone and if she had a problem she was perfectly capable of relaying information.

 

“You know, she’s a lot pretty than me,” I said, “So why don’t you let her answer your questions and if at any time she needs more answers I’ll be glad to assist.”

 

This jerk still had his Rocky warm up suit on. It wasn’t a question of man to man information now. His whole attitude was that he was the champ and everyone else is a chump. Sorry, pal, it doesn’t work that way.

 

After I explained the whole thing again to him I asked Mandy if what I said was similar to what she had told him earlier. The answer was “YES”… go figure. As he walked out the door I reminded him that his disrespect to the guys in the shop was unacceptable and blocking the garage doors slows down our ability to offer service to other customers.

 

“Your problem is I’m the customer here….and you should be showing respect to me before I have to show one ounce of respect to you or anybody here,” shouting as loud as he could.

 

“You know, I’m sorry for the misunderstanding, I try to keep cost down by having someone in the front office to handle these things. But apparently you’re from the old school of auto repair where a guy talks to a guy about car stuff… sorry, I guess I didn’t think about that,” I said as humbly as I could… which by the way I didn’t mean any of it. It was mainly for his feeble ego than for anything else.

 

He accepted my apology and then wanted to know if he bought a used rearend how much I would charge to install it. I wanted to say….not near enough…in fact…never in your life would I do another job for the likes of you. But I didn’t.

 

However, little does he know, his little sign in his office might be his way of showing his macho ego. But I hate tell him this, his story is in print and it’s all over the country….so if you are going to put a sign in your office area to let everyone you know about “the” asshole, you should take notice of one thing. Make sure “the” asshole you’re dealing with isn’t a writer of such stories. Because, I think my little sign is bigger than your little sign…. there, Mr. Balboa…..!

 

 

 

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++

 

 

Link to comment
Share on other sites



Why is the world filled with jerks like this? Everywhere you go and every shop owner you speak to can tell they too have had their share of people who have absoulutley no respect for other people and are empty of common decency.

 

The only good news, it's not only me.

 

Great story again Gonzo….keep 'em coming!

 

 

The sad part Joe, is that you're right... everyone has had to deal with people like this butthead. That's one of the reason why I feel it's important to write these stories. Since we all have had these experiences it only makes sense to remind ourselves and to inform the next shop owners and techs... that the world is full of odd balls like this guy. I think it makes me appreciate the rest of the consumer world more, and really appreciate that person who is happy to come to my shop to get some work done.

 

And one more thing. When I'm out running around and I'm "the consumer" I think I am more likely to understand the plight of the guy behind the counter after reading/writing these stories. I, myself, will not - never --- act like this guy... ever.

Link to comment
Share on other sites

  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      It always amazes me when I hear about a technician who quits one repair shop to go work at another shop for less money. I know you have heard of this too, and you’ve probably asked yourself, “Can this be true? And Why?” The answer rests within the culture of the company. More specifically, the boss, manager, or a toxic work environment literally pushed the technician out the door.
      While money and benefits tend to attract people to a company, it won’t keep them there. When a technician begins to look over the fence for greener grass, that is usually a sign that something is wrong within the workplace. It also means that his or her heart is probably already gone. If the issue is not resolved, no amount of money will keep that technician for the long term. The heart is always the first to leave. The last thing that leaves is the technician’s toolbox.
      Shop owners: Focus more on employee retention than acquisition. This is not to say that you should not be constantly recruiting. You should. What it does means is that once you hire someone, your job isn’t over, that’s when it begins. Get to know your technicians. Build strong relationships. Have frequent one-on-ones. Engage in meaningful conversation. Find what truly motivates your technicians. You may be surprised that while money is a motivator, it’s usually not the prime motivator.
      One last thing; the cost of technician turnover can be financially devastating. It also affects shop morale. Do all you can to create a workplace where technicians feel they are respected, recognized, and know that their work contributes to the overall success of the company. This will lead to improved morale and team spirit. Remember, when you see a technician’s toolbox rolling out of the bay on its way to another shop, the heart was most likely gone long before that.
  • Similar Topics

    • By carmcapriotto
      Thanks to our Partners, Shop Boss, and 360 Payments
      Emily Chung shares her experiences as a female minority shop owner in the automotive industry. She reflects on societal tendencies to highlight differences rather than commonalities. She encourages her peers to engage with her on business-related topics rather than focusing on her gender and ethnicity. Emily Chung, AutoNiche in Markham, ON. Emily’s previous episodes HERE Show Notes:
      Emily's Perspective as a Female Shop Owner (00:00:26) Challenges and Comments Faced (00:00:56) Desire for Business-Focused Conversations (00:01:41) Importance of Leadership and Skills (00:02:29) Understanding Intentions Behind Comments (00:03:52) Common Ground with Male Counterparts (00:04:57) Personal Mindset on Success (00:06:04) Role Model Considerations (00:06:54)
      Thanks to our Partners, Shop Boss and 360 Payments Shop Boss – Shop Management Software built by shop owners for shop owners. It works the way you need it to, right out of the box. Find on the web at https://shopboss.net Connect with the Podcast: -Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ -Join Our Virtual Toastmasters Club: https://remarkableresults.biz/toastmasters -Join Our Private Facebook Community: https://www.facebook.com/groups/1734687266778976 -Subscribe on YouTube: https://www.youtube.com/carmcapriotto -Follow on LinkedIn: https://www.linkedin.com/in/carmcapriotto/ -Follow on Instagram: https://www.instagram.com/remarkableresultsradiopodcast/ -Follow on Twitter: https://twitter.com/RResultsBiz -Visit the Website: https://remarkableresults.biz/ -Join our Insider List: https://remarkableresults.biz/insider -All books mentioned on our podcasts: https://remarkableresults.biz/books -Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom -Buy Me a Coffee: https://www.buymeacoffee.com/carm -The Aftermarket Radio Network: https://aftermarketradionetwork.com -Special episode collections: https://remarkableresults.biz/collections The Aftermarket Radio Network Remarkable Results Radio Podcast with Carm Capriotto: Advancing the Aftermarket by Facilitating Wisdom Through Story Telling and Open Discussion Diagnosing the Aftermarket A to Z with Matt Fanslow: From Diagnostics to Metallica and Mental Health, Matt Fanslow is Lifting the Hood on Life. The Auto Repair Marketing Podcast with Kim and Brian Walker: Marketing Experts Brian & Kim Walker Work with Shop Owners to Take it to the Next Level. The Weekly Blitz with Chris Cotton: Weekly Inspiration with Business Coach Chris Cotton from AutoFix - Auto Shop Coaching. Business by the Numbers with Hunt Demarest: Understand the Numbers of Your Business with CPA Hunt Demarest. Speak Up! Effective Communication with Craig O'Neill: Develop Interpersonal and Professional Communication Skills when Speaking to Audiences of Any Size.            
      Click to go to the Podcast on Remarkable Results Radio
    • By nptrb

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By carmcapriotto
      In this episode of Business by the Numbers, Hunt Demarest, CPA at Paar Melis Associates, explores how auto repair shop owners can simplify their financial statements using the 50/30/20 profit model.
      Key Topics:
      Simplifying KPIs to focus on the most impactful metrics How to effectively analyze your P&L statement IRS tax extensions for those affected by hurricanes Deep dive into the 50/30/20 profit model
      https://www.irs.gov/newsroom/irs-provides-relief-for-helene-various-deadlines-postponed-to-may-1-2025-part-or-all-of-7-states-qualify
      Thanks to our partner, NAPA TRACS
      Did you know that NAPA TRACS has onsite training plus six days a week support?
      It all starts when a local representative meets with you to learn about your business and how you run it.  After all, it's your shop, so it's your choice.
      Let us prove to you that Tracs is the single best shop management system in the business.  Find NAPA TRACS on the Web at NAPATRACS.com
      Thanks to our partner, Promotive
      It’s time to hire a superstar for your business; what a grind you have in front of you. Introducing Promotive, a full-service staffing solution for your shop. Promotive has over 40 years of recruiting and automotive experience. If you need qualified technicians and service advisors and want to offload the heavy lifting, visit www.gopromotive.com.
      Paar Melis and Associates – Accountants Specializing in Automotive Repair
      Visit us Online: www.paarmelis.com
      Email Hunt: [email protected]
      Download a Copy of My Books Here:
      Wrenches to Write-Offs Your Perfect Shop 
      The Aftermarket Radio Network: https://aftermarketradionetwork.com/
      Remarkable Results Radio Podcast with Carm Capriotto: Advancing the Aftermarket by Facilitating Wisdom Through Story Telling and Open Discussion.
      Diagnosing the Aftermarket A to Z with Matt Fanslow: From Diagnostics to Metallica and Mental Health, Matt Fanslow is Lifting the Hood on Life.
      Business by the Numbers with Hunt Demarest: Understand the Numbers of Your Business with CPA Hunt Demarest.
      The Auto Repair Marketing Podcast with Kim and Brian Walker: Marketing Experts Brian & Kim Walker Work with Shop Owners to Take it to the Next Level.
      The Weekly Blitz with Chris Cotton: Weekly Inspiration with Business Coach Chris Cotton from AutoFix - Auto Shop Coaching.
      Speak Up! Effective Communication with Craig O'Neill: Develop Interpersonal and Professional Communication Skills when Speaking to Audiences of Any Size.
      Click to go to the Podcast on Remarkable Results Radio
    • By carmcapriotto
      Today, we’re diving into an essential topic—how to make your brand stand out from the competition. While you may already provide exceptional service, standing out in a crowded market requires a focused strategy. It’s not just about doing good work; it's about showing what makes your shop truly unique.
      We’ll break down the key ways to differentiate your brand, from nailing your customer service to using your core values to your advantage. We’ll also talk about how paying attention to your shop’s appearance and maintaining an active social media presence can make a big difference in how customers see you.
      If you're ready to learn how to make your shop rise above the rest and attract more customers, this episode is for you.
      Thank you to RepairPal for sponsoring The Auto Repair Marketing Podcast. Learn more about RepairPal at https://repairpal.com/shops
      Lagniappe (Books, Links, Other Podcasts, etc)
      Building a StoryBrand by Donald Miller : https://storybrand.com/building-a-storybrand-book/ 
      McCart’s Auto Center - Ratchet and Wrench : https://www.ratchetandwrench.com/shop-life/article/11464229/shop-view-mccarts-auto-center 
      https://shopmarketingpros.com/how-to-make-your-brand-stand-out-from-your-competitors/ 
      Show Notes with Timestamps
      Introduction to Brand Differentiation (00:00:10) Brian introduces the topic of brand differentiation for auto repair shops. Understanding Brand (00:02:26) Explains that a brand is more than just a logo; it embodies the overall customer experience. Customer Perception and Reviews (00:04:25) Discusses the importance of customer reviews in identifying what makes a shop unique. Identifying Strengths and Weaknesses (00:05:30) Encourages owners to focus on strengths while addressing weaknesses for better brand differentiation. Concept of a Four-Dimensional Shop (00:06:32) Introduces the idea of a four-dimensional shop, focusing on customer service, quality, timeliness, and price. Timeliness and Price Mindset Shift (00:08:29) Stresses the importance of communication and fair pricing in building a strong brand. RepairPal Sponsorship Mention (00:10:28) Thanks RepairPal for sponsoring and highlights its benefits for auto repair shops. Building Trust with Clients (00:11:26) Emphasizes the need to cultivate trust through social media and transparent communication. Core Values Integration (00:12:23) Explains how core values should be central to the brand and daily operations of the shop. Daily Recognition of Core Values (00:13:19) Describes the implementation of daily recognition for team members based on core values. Core Values and Brand Identity (00:15:19) Discusses how core values, like happiness, differentiate a brand and impact team morale. Outward Appearance of Shops (00:17:18) Emphasizes the importance of a clean and organized environment in shaping brand perception. Customer Perspective (00:19:28) Encourages shop owners to view their business from a customer's angle to identify areas for improvement. Impact of Shop Aesthetics (00:20:35) Explains how the physical appearance of a shop affects customer impressions and overall branding. Importance of Business Name (00:23:10) Highlights the significance of a shop's name in representing its identity and differentiating from competitors. Examples of Effective Names (00:24:03) Provides examples of shop names that effectively convey their unique selling propositions. Role of Logos in Branding (00:27:47) Discusses how a logo serves as a visual representation of a shop and its differentiation Logo Importance (00:28:53) Discussion on effective logo design and its impact on brand representation. Color Theory in Branding (00:29:48) Exploration of how colors influence perceptions and emotions related to a brand. Crafting Your Brand Message (00:30:55) Advice on creating a brand message that resonates with client concerns rather than just shop credentials. Understanding Client Problems (00:31:52) Emphasis on identifying deeper client issues to tailor brand messaging effectively. Book Recommendation: Building a Story Brand (00:32:44) Recommendation of Donald Miller's book for crafting impactful brand messaging. Differentiation in a Competitive Market (00:33:39) Final thoughts on the necessity of standing out in the auto repair industry. Call to Action for Marketing Help (00:34:37) Invitation for listeners to seek marketing assistance from Shop Marketing Pros. Acknowledgment of Sponsors (00:35:36) Thanks to RepairPal for sponsoring the podcast and supporting the auto repair community.
      How To Get In Touch
      Group - Auto Repair Marketing Mastermind
      Website - shopmarketingpros.com 
      Facebook - facebook.com/shopmarketingpros 
      Get the Book - shopmarketingpros.com/book
      Instagram - @shopmarketingpros 
      Questions/Ideas - [email protected]
      Click to go to the Podcast on Remarkable Results Radio
    • Fast Free Shipping on All Orders Over $50
    • By champtires

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.



  • Our Sponsors



×
×
  • Create New...