Quantcast
Jump to content


Recommended Posts

Posted

I received an email today from a Consumer stating "Your price is too high, so hell with you sir!" in response a marketing email inviting him back for his next service.   My initial reaction was uh-oh, quickly followed by "Why am I not hearing more pricing complaints?".   This is quite interesting as we were in a discussion last week, talking about our prices being too low.   We are priced competitively in the market, but with a higher service level, likely, we should be able to earn more with a higher pricing.

I remember reading somewhere that if you don't have enough complaints of your price is too high, then you are priced too low.    There is a balance in pricing.   On one hand, we have price leaders nearby (, with prices so low that they would go broke quickly if they were honest) that will rob the price shoppers blind when they visit as well as other reputable shops with various pricing levels.   

I operate a combo lube and repair shop.     My repair labor rate is a premium to the area and we have talented technicians that rate this premium.    I'm at a small premium on the Lube, but believe it should be higher and .    

After having a chuckle on today's email, I figured it would make for a good conversation.   What is the right Price-is-too-high-complaint rate?  1% 5% 10%?     We might get a 0.5-0.3% abandon rate at the counter over pricing.  I'm sure that there is a silent minority that just doesn't come back, yet makes no noise.

  • Like 1


Posted

In case anyone has been under a rock home prices rose 20% in the last year. Food prices almost doubled. Parts prices went up a lot. Gas is 89% more. Half the shops in my area closed for good.  So I raised my prices. No more $19.99 oil change. Nobody really complains about the labor rate but they do vocalize about their 8 quart silverado synthetic oil change. 

  • Like 3
  • 3 weeks later...
Posted

I am not going to pile on, but I came from outside the industry and I have always believed that if 10-15% of your clients don't walk because "your price is too high" then you aren't priced high enough.  We provide excellent service, and we don't have ANY technicians on staff who have less than 5 years experience in the automotive world.  I HATE giving a quote prior to looking at a vehicle, and it's because every car is different.  Are you recently relocated from NJ with your 5 year old chevy equinox?  It's a rotbox, and I have the spend 3x the labor time to get your rusty crap apart?  That should somehow be MY problem?  Nope.  I have a minimum annual increase, we have the highest labor rate in the area and I am fine with it.  We provide service, above and beyond what that rate reflects, and my front office desk person and myself are full invested in the successes.  

Above and beyond the reflection of the area, have you calculated your costs to reflect your profit levels required?  I analyze about 2x a year what we need to be doing to provide for the services we offer, the employee satisfaction and for the best experience possible  I want to make money.  I want to reward my team for their efforts.  I want to save some money for those short months...  But I can't do all that if I am simply looking at my competition and determining what I will charge.

  • Like 3
Posted
17 hours ago, Joe Marconi said:

After 41 years as a shop owner I will stand by my conviction that we have not charged enough and we have ALL suffered because of it.   

Not sure if I have this right, but I read this as.... to remain competitive, I must consider other shops in the area with lower prices.  We can be at the top with pricing, but not way over the top (of the median area pricing).  The median price needs to go up; otherwise, we suffer.

Did you know that large apartment complexes update their pricing as often as daily?   They will survey prices in a 10 mile radius and compare their rates against their comparable class (A, B, C, D).   Smaller operators will not have the resources to do such dynamic updates, so their pricing may change less frequently.   Maybe there is a business case for a pricing aggregator service that provides Market research data.

I know of a local well respected shop, with low labor rates, because his overhead is low.   He could charge more, but doesn't.  Complacency with earnings?   I know of others that focus on being the lowest cost as a strategy, but can't afford tooling.   Education?  

When you are first starting out, your schedule is a giant hole and not worth populating because any and every time will be open.   You don't want to turn any business away.   You are scared that no one else will fill this void.   Then when business starts getting better, you don't want to "rock the boat" with pricing changes for fear of taking a step back.   I think there's a bigger newbie challenge:  How to bill for ALL hours used.   What is the difference between Win Some, Lose Some outliers and we just estimated wrong?  How to tell the difference between technical efficiency and unknown job complexity.  Does the bill suddenly jump to compensate?   Can you explain it to your customer and not look bad?  Or do you just eat it?    These are natural survival instincts.  (I had all of these phobias and I can't say they're gone, but some are repressed!  🙂 )  The best shops have much of this already figured out.   This forum is one such place to learn from other successful leaders.

Personally, I see the repair business as a Trust Business.  If you are really Trusted, then, here are the keys.  Fix it.    I sometimes cringe internally when I'm asked about my labor rate, but 99% of the time, they just say, Oh.  My cringing is pointless.  It's not the cost that matters... it is the value received.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      It always amazes me when I hear about a technician who quits one repair shop to go work at another shop for less money. I know you have heard of this too, and you’ve probably asked yourself, “Can this be true? And Why?” The answer rests within the culture of the company. More specifically, the boss, manager, or a toxic work environment literally pushed the technician out the door.
      While money and benefits tend to attract people to a company, it won’t keep them there. When a technician begins to look over the fence for greener grass, that is usually a sign that something is wrong within the workplace. It also means that his or her heart is probably already gone. If the issue is not resolved, no amount of money will keep that technician for the long term. The heart is always the first to leave. The last thing that leaves is the technician’s toolbox.
      Shop owners: Focus more on employee retention than acquisition. This is not to say that you should not be constantly recruiting. You should. What it does means is that once you hire someone, your job isn’t over, that’s when it begins. Get to know your technicians. Build strong relationships. Have frequent one-on-ones. Engage in meaningful conversation. Find what truly motivates your technicians. You may be surprised that while money is a motivator, it’s usually not the prime motivator.
      One last thing; the cost of technician turnover can be financially devastating. It also affects shop morale. Do all you can to create a workplace where technicians feel they are respected, recognized, and know that their work contributes to the overall success of the company. This will lead to improved morale and team spirit. Remember, when you see a technician’s toolbox rolling out of the bay on its way to another shop, the heart was most likely gone long before that.
  • Similar Topics



  • Our Sponsors



×
×
  • Create New...