Quantcast
Jump to content


7 Years of Bad Luck - a tongue and cheek look at mechanics and their superstitions


Gonzo

Recommended Posts

7 Years of Bad Luck

Black cats, a rabbits foot, a 4 leaf clover, the number 13, avoiding stepping on cracks, and always take the driver’s front tire off first. Ok, I’ve heard most of these superstitions, but the tire thing? What’s that all about? Well, there are some of us mechanics who have a few superstitions just like baseball players, sailors and the like. A lot of mechanics won’t admit it, or don’t think they are superstitious, but we all know you are.

Whether it’s a lucky screwdriver, a special place you always lay the air ratchet, or maybe how you organize your tool box there’s bound to be something in the way of a superstition somewhere among that pile of tools. Shy of calling out the witchdoctors to dance clockwise around a car while carrying a dead chicken and chanting some sort of low baritone incantation before every diagnostic procedure, I think it’s safe to say there are more than a few superstitions in the of auto repair biz.

 

I’m not one to think I’m even the least bit superstitious (knock on wood). I just don’t believe in that stuff, because I’m not superstitious. OK, OK, my wife says I am, and points out my flaws all the time, even if I won’t admit it. For instance, I won’t start a car after I’ve done a bunch of work on the engine, unless I’ve left at least one tool under the hood. After it’s started and checked out, then and only then will I pick up all my tools. Superstitious, you say? Maybe, or it could be because even after I’ve put everything back together something may or may not be as perfect as it should be. At least then, when I have to redo something, all the tools are still right where they need to be. But, you can bet even if I finished a job and I know everything is right, I’m still going to leave at least one tool under there … just in case.

I’ve watched techs nervously cross their fingers or keep their eyes shut while turning the key for the first time on a new motor they just rebuilt. (Usually followed by a sigh of relief and a couple of Yahoo’s! or the other, and we all know what that would be.) Or the guy who would never put a car in his service bay when the car color had the same first letter of that day of the week. (Totally weird. He eventually quit, and now works on forklifts instead. Yellow is a good color for him.) I once worked with a tech who wouldn’t start a repair unless he had a pocket screwdriver, for fear it would jinx him without it. It didn’t matter if he was just changing a battery or scanning for codes, that pocket screwdriver had to be in his pocket. As a joke, a couple of us hid all this guy’s pocket screwdrivers, and then watched him beg and plead to borrow one. Cruel, but it was still pretty funny anyway.

It doesn’t matter if it’s a full moon, a rainy day, a black cat that just walked across your service bay, or perhaps the color of the car there’s bound to be one guy or gal who has some premonition that something isn’t going to go right for them. Why, I’ve even heard of some mechanics (and shops) that won’t answer the shop phone if it rings the very second they unlock the doors. They’ll let somebody else get it or wait for them to call back. I guess they don’t want to start their day off with a complaint, or they just think it’s bad luck to do so. Nevertheless, it’s still sounds like a superstition to me. From the gardener to the baker everybody and every trade has their own superstitions.

We’ve probably all heard of the baseball players who won’t change their socks, or wear the same jersey during a play off, or football players who always have to tap the sign over the door as they go onto the field. It’s just one more of those wacky superstitions that keep showing up. Even the golfing great Jack Nicklaus had his own superstitions. He wouldn’t play unless he had three pennies in his left pocket during a round of golf. Sailors used to watch the sky, and if it was red in the morning, sailor take warning. Then there is the old “knock on wood” that to this day I still see people do. Superstitious? Sure, or perhaps a quirky habit? Who’s to say? Then again, it might just be to what degree we carry our personal superstitions in public that separates us from the completely insane or just being a little wacky. Except for breaking a mirror. That might really be 7 years of bad luck. I broke one about 5 years ago and the wife still hasn’t left me off the hook for it.

So how superstitious are you? I’ve consulted my horoscope and it says today is a good day for you to tell all. So alrighty then, all you mechanics and technicians out there or anyone else for that matter, let’s hear your superstitions. If you don’t have one then let’s hear about the guy in the next service bay. (That way we won’t know … it’s actually you.)

 


View full article

  • Like 1
Link to comment
Share on other sites



I was golfing last weekend, (like that ain't nothin' new) and one of the guys asked, "So, what's this weekends story about?" So, I told him. He said he wasn't superstitious at all. Then, at the next hole which was a par 3 over a huge lake he ceremoniously tosses a cheap ball into the water before he takes his shot. Said, "That way I know my shot won't land in the water." I think he's a bit superstitious, but he ain't going to admit it.

Link to comment
Share on other sites

  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      It always amazes me when I hear about a technician who quits one repair shop to go work at another shop for less money. I know you have heard of this too, and you’ve probably asked yourself, “Can this be true? And Why?” The answer rests within the culture of the company. More specifically, the boss, manager, or a toxic work environment literally pushed the technician out the door.
      While money and benefits tend to attract people to a company, it won’t keep them there. When a technician begins to look over the fence for greener grass, that is usually a sign that something is wrong within the workplace. It also means that his or her heart is probably already gone. If the issue is not resolved, no amount of money will keep that technician for the long term. The heart is always the first to leave. The last thing that leaves is the technician’s toolbox.
      Shop owners: Focus more on employee retention than acquisition. This is not to say that you should not be constantly recruiting. You should. What it does means is that once you hire someone, your job isn’t over, that’s when it begins. Get to know your technicians. Build strong relationships. Have frequent one-on-ones. Engage in meaningful conversation. Find what truly motivates your technicians. You may be surprised that while money is a motivator, it’s usually not the prime motivator.
      One last thing; the cost of technician turnover can be financially devastating. It also affects shop morale. Do all you can to create a workplace where technicians feel they are respected, recognized, and know that their work contributes to the overall success of the company. This will lead to improved morale and team spirit. Remember, when you see a technician’s toolbox rolling out of the bay on its way to another shop, the heart was most likely gone long before that.
  • Similar Topics

    • By JustTheBest

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By carmcapriotto
      Matt Fanslow addresses misconceptions in the automotive repair industry, focusing on a viral social media video about tire repair. Matt explains the importance of following manufacturer protocols, the risks of improper repairs, and the need for ongoing consumer education. He emphasizes the long-term integrity of honest repairs and advises consumers to ask questions rather than assume malintent from repair shops. 
      Show Notes
      Puncture Repair Procedures: https://www.ustires.org/sites/default/files/2021-10/Puncture_repair_handout_17_2.pdf Tire Repair: What You Can and Cannot Repair on a Flat Tire: https://www.continental-tires.com/products/b2c/tire-knowledge/tire-repair/ Faulty Tire Repair Brings $22.8 Million Court Award: https://www.shopownermag.com/faulty-tire-repair-brings-22-8-million-court-award/ $22.8 Million Faulty Tire Repair Entirely Avoidable: https://www.tirereview.com/22-8-million-faulty-tire-repair-entirely-avoidable/ Discussion on Auto Repair Integrity (00:01:06) Personal Tire Repair Experience (00:01:17) Cost Comparison of Tire Repairs (00:02:25) Incompetence vs. Scamming (00:02:33) Lack of Standard Protocols (00:04:07) Importance of Manufacturer Protocols (00:04:41) Tire Repair Limitations (00:08:37) Legal Precedents in Auto Repair (00:09:42) Consumer Awareness and Questions (00:10:55) Disconnect Between Clients and Mechanics (00:12:04)  
      The Aftermarket Radio Network
       
      Remarkable Results Radio Podcast with Carm Capriotto: Advancing the Aftermarket by Facilitating Wisdom Through Story Telling and Open Discussion
      Diagnosing the Aftermarket A to Z with Matt Fanslow: From Diagnostics to Metallica and Mental Health, Matt Fanslow is Lifting the Hood on Life.
      The Auto Repair Marketing Podcast with Kim and Brian Walker: Marketing Experts Brian & Kim Walker Work with Shop Owners to Take it to the Next Level.
      The Weekly Blitz with Chris Cotton: Weekly Inspiration with Business Coach Chris Cotton from AutoFix - Auto Shop Coaching.
      Business by the Numbers with Hunt Demarest: Understand the Numbers of Your Business with CPA Hunt Demarest.
      Speak Up! Effective Communication with Craig O'Neill: Develop Interpersonal and Professional Communication Skills when Speaking to Audiences of Any Size.
      Click to go to the Podcast on Remarkable Results Radio
    • By carmcapriotto
      Thanks to our Partners, Shop Boss, and 360 Payments In this episode of For the Record, Maylan Newton tackles the pressing issue of the technician shortage in the automotive industry. Maylan emphasizes the importance of proactive involvement from shop owners and industry representatives in engaging with educational institutions and students. He highlights the need for better representation at vocational events and the necessity of running businesses that attract and retain skilled technicians. Maylan urges the industry to work together to create an inviting career path for the next generation. Maylan Newton, ESI- Educational Seminars Institute. Maylan’s previous Episodes HERE Show Notes
      Hiring Challenges in the Industry (00:00:30) Maylan discusses the full-time nature of hiring and the industry's struggles to attract technicians. Skills USA Event Insights (00:01:02) Maylan shares his experience at a Skills USA event, highlighting the lack of automotive representation. Engaging Young People (00:02:19) He emphasizes the need for the automotive industry to inform youth about career paths available. Personal Outreach to Schools (00:03:24) Maylan recounts his efforts speaking at high schools to promote automotive careers. Importance of Industry Visibility (00:05:25) Maylan urges industry members to actively engage with schools and promote career opportunities. Attracting and Retaining Technicians (00:06:17) He stresses the need for fair treatment and compensation for new technicians entering the field. Talent Acquisition Efforts (00:08:01) Maylan highlights the proactive approach of other industries in recruiting young talent. Call to Action for Shop Owners (00:09:38) He challenges shop owners to commit to engaging with local schools and vocational programs. Quotes for Inspiration (00:10:35) Mahlon shares motivational quotes to encourage industry involvement and improvement.
      Thanks to our Partners, Shop Boss and 360 Payments Shop Boss – Shop Management Software built by shop owners for shop owners. It works the way you need it to, right out of the box. Find on the web at https://shopboss.net Connect with the Podcast: -Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ -Join Our Virtual Toastmasters Club: https://remarkableresults.biz/toastmasters -Join Our Private Facebook Community: https://www.facebook.com/groups/1734687266778976 -Subscribe on YouTube: https://www.youtube.com/carmcapriotto -Follow on LinkedIn: https://www.linkedin.com/in/carmcapriotto/ -Follow on Instagram: https://www.instagram.com/remarkableresultsradiopodcast/ -Follow on Twitter: https://twitter.com/RResultsBiz -Visit the Website: https://remarkableresults.biz/ -Join our Insider List: https://remarkableresults.biz/insider -All books mentioned on our podcasts: https://remarkableresults.biz/books -Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom -Buy Me a Coffee: https://www.buymeacoffee.com/carm -The Aftermarket Radio Network: https://aftermarketradionetwork.com -Special episode collections: https://remarkableresults.biz/collections The Aftermarket Radio Network Remarkable Results Radio Podcast with Carm Capriotto: Advancing the Aftermarket by Facilitating Wisdom Through Story Telling and Open Discussion Diagnosing the Aftermarket A to Z with Matt Fanslow: From Diagnostics to Metallica and Mental Health, Matt Fanslow is Lifting the Hood on Life. The Auto Repair Marketing Podcast with Kim and Brian Walker: Marketing Experts Brian & Kim Walker Work with Shop Owners to Take it to the Next Level. The Weekly Blitz with Chris Cotton: Weekly Inspiration with Business Coach Chris Cotton from AutoFix - Auto Shop Coaching. Business by the Numbers with Hunt Demarest: Understand the Numbers of Your Business with CPA Hunt Demarest. Speak Up! Effective Communication with Craig O'Neill: Develop Interpersonal and Professional Communication Skills when Speaking to Audiences of Any Size.              
      Click to go to the Podcast on Remarkable Results Radio
    • By champtires

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • Fast Free Shipping on All Orders Over $50
    • By Changing The Industry
      Avoiding Costly Mistakes With Wheel Hub Assemblies


  • Our Sponsors



×
×
  • Create New...