Quantcast
Jump to content

Recommended Posts

Posted

I am purchasing 10 new lifts this week, I am trying to decide between the Rotary Shock Wave lifts or the standard Rotary lifts. There is a $15,000 difference between the two options in total. I do not mind spending the extra cash as long as it is valuable. The basic difference is a 35 second difference going up and 30 second difference on the way down. It may not seem like much time to many. But I'm all about flow and efficiency. Does anyone have side by side experience with these two lifts? If so, do you find the faster lifts worth the extra expense? As well, any input, about the in ground Smart Lifts compared to the above ground two post lifts would be of help as well. Thank You

  • Like 1


Posted

IMHO it's not worth the extra 15k and there is such a thing as too fast. How many times have you seen guys leave something under the car or too close and the car touches it. Right now the speeds are slow enough you can normally stop and correct the issue with zero damage.

Posted

If you have a high car count and there is a lot of traffic on and off your lifts I think that it may be worth calculating. When you calculate a techs worth per minute you'll see how much you could potentially miss out on

  • Like 1
  • 2 months later...
Posted

I've calculated the time savings, crunched the numbers, and went with standard lifts. When quoting any job be sure to put in the extra .2 labor time it takes to make the car go up/down, sweep the bay, wash hands, test drive, and generally tidy up the car and get the next one in. It takes about 10 minutes on average to do this stuff.

 

Efficiency isn't made by speeding up the lifts, its made at the service counter.

Posted

I personally don't think a faster lift is any advantage, for one sometimes you need to lower the car at a slow rate to align something as it comes down in that case a slower lift would make it easier. Also as the car comes down the tech can go through his head weather he has tightened everything etc. As far as the saving time well, really? I have more problems with customers pulling up out side the bays asking silly questions etc. maybe taking away a techs cell phone will save that extra minute and 5 seconds. Is 15K worth 65 seconds? Not by my bank account.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Available Subscriptions

  • Have you checked out Joe's Latest Blog?

         0 comments
      It always amazes me when I hear about a technician who quits one repair shop to go work at another shop for less money. I know you have heard of this too, and you’ve probably asked yourself, “Can this be true? And Why?” The answer rests within the culture of the company. More specifically, the boss, manager, or a toxic work environment literally pushed the technician out the door.
      While money and benefits tend to attract people to a company, it won’t keep them there. When a technician begins to look over the fence for greener grass, that is usually a sign that something is wrong within the workplace. It also means that his or her heart is probably already gone. If the issue is not resolved, no amount of money will keep that technician for the long term. The heart is always the first to leave. The last thing that leaves is the technician’s toolbox.
      Shop owners: Focus more on employee retention than acquisition. This is not to say that you should not be constantly recruiting. You should. What it does means is that once you hire someone, your job isn’t over, that’s when it begins. Get to know your technicians. Build strong relationships. Have frequent one-on-ones. Engage in meaningful conversation. Find what truly motivates your technicians. You may be surprised that while money is a motivator, it’s usually not the prime motivator.
      One last thing; the cost of technician turnover can be financially devastating. It also affects shop morale. Do all you can to create a workplace where technicians feel they are respected, recognized, and know that their work contributes to the overall success of the company. This will lead to improved morale and team spirit. Remember, when you see a technician’s toolbox rolling out of the bay on its way to another shop, the heart was most likely gone long before that.
  • Similar Topics

    • By Joe Marconi

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By Changing The Industry
      Why Trusting Our Services Makes All the Difference #podcast #autorepairbusiness #automotivebusiness
    • By Changing The Industry
      Episode 188 - The Highs and Lows of Running Two Shops With Adam and Jessica Debaja
    • By JustTheBest

      Premium Member Content 

      This content is hidden to guests, one of the benefits of a paid membership. Please login or register to view this content.

    • By carmcapriotto
      Thanks to our Partners, AAPEX, NAPA TRACS, and Automotive Management Network This episode explores the distinctions between training and education, comparing the educational systems in the U.S. and Europe and how the automotive industry can support academic institutions. Tanner Brandt emphasizes the value of vocational training and soft skills, while Michael Ingvardsen highlights the advantages of industry collaboration and the need for engaging training resources. Tanner and Michael advocate for a cultural shift in automotive education, calling for long-term industry partnerships and a focus on continuous learning to better equip future technicians. Michael Ingvardsen, Global Technical Training Manager, Nissens Automotive Tanner Brandt, Autodiag Clinic. Tanner’s previous episodes HERE. Show Notes
      Discussion on Education vs. Training (00:03:03) Carm emphasizes the importance of distinguishing between training and education in the automotive field. Tanner's Perspective on Training (00:03:53) Tanner discusses the differences between short-term training and long-term educational processes. Michael on European Training Challenges (00:04:48) Michael explains the cultural differences in training attendance between Europe and the U.S. Vacation in Denmark (00:06:26) Carm and Tanner discuss the generous vacation policies in Denmark compared to the U.S. High School Vocational Programs (00:07:25) Tanner shares insights about vocational education systems like BOCES in New York. Shop Owners and Vocational Programs (00:08:19) Carm highlights the need for shop owners to engage with vocational education centers. Challenges in Automotive Education (00:09:12) Tanner addresses misconceptions regarding the readiness of students entering the automotive workforce. Michael's Educational Experience in Denmark (00:10:56) Michael outlines the differences in educational approaches and student opportunities in Denmark. Cost of Education in Denmark (00:13:10) Carm and Michael discuss the free education system in Denmark and its implications. High School Structure in Denmark (00:14:26) Michael explains the schooling structure, including high school and vocational training paths. Career Path in Automotive for Danish Students (00:15:27) Michael describes the four-year training program for students pursuing automotive careers in Denmark. Challenges in Automotive Education (00:17:58) Discussion on why students lack education post-high school and the need for vocational training. Internships and Apprenticeships (00:21:42) Exploration of internships as a result of vocational training and the potential for hands-on experience. Industry Support for Education (00:22:07) Discussion on how companies, like Nissen's, support educational institutions continuously rather than temporarily. Transactional Nature of U.S. Education (00:23:32) Critique of the transactional approach in U.S. automotive education versus long-term support seen in other countries. Instructor Education and Training (00:24:20) Concerns about how current instructors in the U.S. are educated and the validity of their training sources. Curriculum Changes in Colleges (00:27:36) Changes at a college level to improve student outcomes by replacing traditional subjects with lab-focused learning. Differences Between AAS and AOS Degrees (00:29:49) Comparison of Associates of Applied Science and Associates in Occupational Science degrees and their implications for students. Soft Skills in Education (00:32:58) Discussion on the lack of soft skills training in automotive education and its importance for student success. Work-Life Balance Discussion (00:36:33) Exploration of communication skills and generational changes impacting work-life balance in the automotive industry. Personal Reflection on Travel (00:37:01) Michael shares his journey from extensive travel to prioritizing family time and achieving better work-life balance. Content Development in Training (00:38:46) Tanner discusses his experience in content development for training and differences in presentation styles. Interactive Learning Approaches (00:40:46) The need for interactive and entertaining training presentations to engage learners effectively. Learning Management Systems (00:42:01) Discussion on the advantages of established learning management systems in European training compared to the U.S. Corporate Training Consistency (00:43:26) Michael highlights the importance of maintaining consistent training materials across all trainers in his organization. Need for Communication Courses (00:45:05) Tanner advocates for incorporating communication courses in automotive education to improve interpersonal skills. Real-World Communication Training (00:46:56) Tanner shares insights on practical communication training methods that encourage interaction with strangers. Final Thoughts from Michael (00:48:03) Michael encourages ongoing training and education for both students and professionals in the automotive industry. Tanner's Call to Action (00:49:06) Tanner urges educational institutions and companies to collaborate and improve automotive training programs.
      Thanks to our Partners, AAPEX, NAPA TRACS, and Automotive Management Network Set your sights on Las Vegas in 2024. Mark your calendar now … November 5th-7th, 2024. AAPEX - Now more than ever. And don’t miss the next free AAPEX webinar. Register now at http://AAPEXSHOW.COM/WEBINAR NAPA TRACS will move your shop into the SMS fast lane with onsite training and six days a week of support and local representation. Find NAPA TRACS on the Web at http://napatracs.com/ Get ready to grow your business with the Automotive Management Network: Find on the Web at http://AftermarketManagementNetwork.com for information that can help you move your business ahead and for the free and informative http://LaborRateTracker.com Connect with the Podcast: -The Aftermarket Radio Network: https://aftermarketradionetwork.com -Follow on Facebook: https://www.facebook.com/RemarkableResultsRadioPodcast/ -Join Our Private Facebook Community: https://www.facebook.com/groups/1734687266778976 -Join Our Virtual Toastmasters Club: https://remarkableresults.biz/toastmasters -Subscribe on YouTube: https://www.youtube.com/carmcapriotto -Follow on LinkedIn: https://www.linkedin.com/in/carmcapriotto/ -Follow on Instagram: https://www.instagram.com/remarkableresultsradiopodcast/ -Follow on X: https://twitter.com/RResultsBiz -Visit the Website: https://remarkableresults.biz/ -Join our Insider List: https://remarkableresults.biz/insider -All books mentioned on our podcasts: https://remarkableresults.biz/books -Our Classroom page for personal or team learning: https://remarkableresults.biz/classroom -Buy Me a Coffee: https://www.buymeacoffee.com/carm -Special episode collections: https://remarkableresults.biz/collections            
      Click to go to the Podcast on Remarkable Results Radio


  • Our Sponsors

×
×
  • Create New...